EMP Protection & Whole-House Surge Protection for Long Island & NYC Homes
Defend everything plugged into your home — from your HVAC and appliances to your generator and solar system — with EMP Shield, professionally installed by licensed master electricians.
An electromagnetic pulse (EMP), a coronal mass ejection (CME) from the sun, or a single lightning strike can send a massive voltage spike through your home's electrical system in a fraction of a second — and a standard power strip won't stop it. True EMP protection works at the main electrical panel, shunting dangerous over-voltage to ground in less than a nanosecond, before it ever reaches your equipment. At Standtech Electric, our licensed and insured master electricians install EMP Shield whole-home EMP and surge protection for homeowners throughout Port Washington, Long Island, and New York City, giving your entire electrical system a recognized layer of defense against EMPs, solar events, lightning, and everyday grid surges.
CLIENT REVIEWS
WHAT OUR CLIENTS ARE SAYING
I had Standtech work on two projects for me. I found the price quoted highly competitive with others I sought estimates from. Both of the project I contracted with Standtech for were completed on time and on budget. The work was performed as specified and those who did the work arrived on time, went about their business in highly professional manner, completed the work to my satisfaction and left things neat and clean. I was very satisfied with the work Standtech did on the two projects I hired them for and wouldn't hesitate to hire Standtech again.
What Is EMP Protection — and Why a Standard Surge Protector Isn't Enough
Most homeowners assume the plug-in surge strips behind their TV have them covered. They don't. Standard surge protectors are built for minor fluctuations — not the extreme, near-instantaneous voltage spikes produced by an electromagnetic pulse, a solar flare, or a direct lightning strike.
Genuine EMP protection is different. It's a device installed directly at your main breaker panel that monitors your entire electrical system and reacts in less than one billionth of a second. When it detects an over-voltage event — whether the surge originates from the grid outside your home or is induced within your home's own wiring — it shunts that excess electricity safely away before voltage can rise high enough to destroy your equipment. That nanosecond-speed response is what separates whole-house EMP and surge protection from the consumer-grade strips most homes rely on, and it's why this technology is trusted to protect everything connected to your panel: HVAC systems, refrigerators, well pumps, home offices, smart home systems, and more.
We are available to assist you 24/7. Get in touch with our ceiling fan experts today at (516) 407-3737 to schedule an appointment!
EMP Shield Installation by Licensed Master Electricians
Standtech Electric installs EMP Shield, a leading whole-home EMP, CME, and lightning protection device that has earned recognition well beyond the residential market. When you choose EMP Shield protection installed by Standtech, you're getting technology that is:
- Listed by the Department of Homeland Security in its EMP Resilience Report
- Tested to military EMP standards, including MIL-STD-188-125-1, MIL-STD-464C, and MIL-STD-461-G, at one of the most respected military test labs in the country
- Engineered to protect against all three phases of an EMP (E1, E2, and E3)
- Built to defend against coronal mass ejections and solar flares, withstanding up to 228,000 amps
- Backed by the manufacturer's lightning protection guarantee, supported by a $25,000 insurance policy, plus an industry-leading 10-year warranty
- 100% American made by a veteran-owned company
A device this important deserves to be installed correctly. Our master electricians mount the EMP Shield directly at your main electrical panel, verify your system is properly configured, and confirm everything is performing as it should before we leave — so your protection is real, not theoretical.
One Device. Every Threat to Your Home's Electrical System.
Whole-house EMP and surge protection isn't just about preparing for a rare catastrophic event. It's about defending your home against the full range of electrical threats, including the ones that happen every day:
- Electromagnetic pulses (EMPs) — protection across all phases (E1, E2, E3)
- Solar flares and coronal mass ejections (CMEs) — naturally occurring events capable of inducing destructive currents in home wiring
- Lightning strikes — a single strike can destroy panels, appliances, and electronics, costing thousands of dollars and months of disruption
- Grid surges and over-voltage events — spikes from utility switching, transformer issues, and power restoration after outages
Modern homes have never had more to lose. The average household runs tens of thousands of dollars in sensitive electronics through its panel — and replacing them after a single surge event is far more expensive than protecting them in the first place.
Protecting the Systems You've Already Invested In
EMP and surge protection is especially valuable if your home runs on more than just basic wiring. Homeowners across Long Island and NYC who benefit most include those with:
- Standby generators — keep your backup power source itself protected, so it's there when you need it
- Solar systems and battery storage, including Tesla Powerwall — defend the energy investment that powers your independence
- EV chargers — protect high-value charging equipment hardwired into your panel
- Smart home and automation systems — safeguard the connected devices that run your daily life
- Home offices — avoid losing the computers and equipment your work depends on
Standtech Electric installs many of these systems ourselves — from generators and Tesla Powerwalls to EV chargers and smart home systems — which means we understand exactly how whole-home surge protection fits into your broader electrical setup. That's a level of insight a device alone can't give you.
Why Long Island Homeowners Trust Standtech Electric for EMP & Surge Protection
Choosing the right protection device matters. Choosing the right electrician to install it matters just as much. Standtech Electric has become a recognized leader in electrical services across Long Island and NYC because homeowners know they can count on us:
- Licensed and insured master electricians with deep experience in panel work, surge protection, and whole-home electrical systems
- Established in 2013, with 25+ years in the electrical industry behind our team
- Local to Port Washington, serving neighbors throughout Long Island and New York City
- 3,000+ projects completed for more than 1,800 clients, from homes to brands like Volvo, 7-Eleven, and Citi Bank
- Free consultations, so you can understand your options before spending a dime
- 24/7 emergency electrical services, because electrical problems don't keep business hours
We strive for 100% satisfaction on every job, and our reviews reflect it — homeowners consistently describe our team as knowledgeable, professional, honest, and meticulous about leaving your home clean.
Peace of Mind That Outlasts the Installation
The real value of whole-home EMP protection isn't something you see — it's everything that doesn't happen after it's installed. The lightning storm that passes without incident. The grid surge that never touches your appliances. The solar event that makes headlines but not your repair bill.
Once your EMP Shield is professionally installed, it works silently around the clock, monitoring your electrical system and reacting faster than any surge can do damage. While the power grid itself may go down in a major event, your home's electrical system and the equipment connected to it remain protected — and if you have a generator or solar system, you're positioned to keep functioning while others can't. It's a one-time installation that keeps defending your home year after year.
For top-quality BMS electrical services, call StandTech Electric at (516) 407-3737
Frequently Asked Questions About EMP & Surge Protection
What is EMP protection, and how does it actually work?
EMP protection defends your home's electrical system against rapid, extreme voltage spikes caused by electromagnetic pulses, solar flares (coronal mass ejections), and lightning. A whole-home EMP protection device like EMP Shield is installed directly at your main breaker panel, where it continuously monitors voltage across your entire electrical system. When it detects a dangerous over-voltage condition — whether the surge comes in from the grid or is induced within your home's own wiring — it shunts the excess electricity safely away in less than a nanosecond. Because the response happens before voltage can climb high enough to cause damage, the appliances, electronics, and systems connected to your panel stay protected.
Is whole-house EMP protection different from a regular surge protector?
Yes, significantly. The plug-in surge strips found in most homes only protect the individual devices plugged into them, and they're designed for relatively small fluctuations — not the massive, near-instantaneous surges produced by an EMP, a CME, or a lightning strike. Whole-house EMP protection is installed at the main electrical panel and protects everything connected to your home's electrical system at once, including hardwired equipment like HVAC systems, well pumps, generators, and EV chargers that plug-in strips can't cover. EMP Shield, the device Standtech Electric installs, has been tested to military EMP standards and is engineered to withstand up to 228,000 amps — performance in an entirely different category from a consumer power strip.
Does EMP Shield protect against lightning strikes?
Lightning protection is one of the most practical, everyday benefits of installing EMP Shield. Lightning is essentially a massive, naturally occurring surge, and a strike on or near your home can destroy your electrical panel, appliances, and electronics in an instant. EMP Shield is designed to detect and shunt that over-voltage before it damages your equipment, and the manufacturer backs its lightning protection with a guarantee supported by a $25,000 insurance policy. For homeowners on Long Island, where storms roll through every season, whole-home lightning and surge protection is one of the most cost-effective safeguards you can add to your electrical system.
Can I install EMP protection myself, or do I need an electrician?
Whole-home EMP and surge protection devices connect directly to your main electrical panel — the most powerful and potentially dangerous point in your home's electrical system. Unless you're an experienced electrician, this is not a do-it-yourself project. Improper installation can create serious safety hazards and may prevent the device from performing the way it's designed to. Standtech Electric's licensed and insured master electricians install EMP Shield correctly the first time, verify your panel and grounding are in proper condition, and confirm the device is functioning before we leave. You also get the benefit of a professional assessment of your overall electrical system, which a boxed device on its own can never provide.
How much does whole-home EMP and surge protection cost?
The total investment depends on your home's electrical setup, including your panel configuration and whether any related electrical work is needed to support a proper installation. Rather than quoting a one-size-fits-all number, Standtech Electric offers free consultations so you can get an accurate picture of what EMP protection would look like for your specific home — with no obligation. When you weigh the cost against what's connected to your panel — HVAC equipment, appliances, electronics, generators, solar systems, EV chargers — whole-home EMP and surge protection is one of the most sensible investments a homeowner can make in protecting their property. Call (516) 407-3737 to schedule your free consultation.
Serving Port Washington, Long Island & New York City
Standtech Electric is proudly based at 135 Haven Ave. in Port Washington, NY, and provides EMP protection and whole-house surge protector installation for homeowners throughout Nassau County, Suffolk County, and the greater New York City area. If you've been searching for EMP protection or whole-home surge protection installed by a local, licensed electrician you can actually talk to, you've found your team.
Ready to protect everything your panel powers? Schedule a free consultation or call
(516) 407-3737 today.
OUR SERVICES
INTERESTED IN OUR SERVICES?
We want to know your needs exactly so that we can provide the perfect solution. Let us know what you want and we’ll do our best to help.






